| Customization: | Available |
|---|---|
| After-sales Service: | Lifetime Service |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Introduction and Features:
Product Overview:
This testing machine is essential for evaluating the physical, mechanical, and structural properties of materials and products under various environments and simulated conditions. It can perform tensile, compression, bending, and shear tests for both metallic and non-metallic materials. The machine calculates key performance metrics such as tensile strength, yield strength, non-proportional elongation, and elastic modulus. It supports closed-loop control modes for constant rate loading, deformation, displacement, or strain, and can verify the conformity of materials or products through process validation tests.
Technical Features and Advantages:
1).Streamlined appearance with a bottom-mounted oil cylinder and well-distributed component strength for a scientific, elegant, and aesthetic design.
Customizable paint options to match customer site environments.
2).The alignment between the upper and lower grips with the machine's tension axis is within 8%, significantly better than the national standard requirement of less than 15%.
3).Hydraulic-driven sample clamping with built-in small oil cylinders in the upper and lower crossbeams. This design ensures better safety, reliability, and durability than external oil cylinders, with no leakage issues.
4).The clamping force increases proportionally with the testing force, ensuring secure sample grip throughout the test.
5).Equipped with a high-response imported servo valve, the hydraulic system enables precise, automated control.
6).Designed for energy efficiency and environmental safety. The pressure-difference servo flow system adjusts working pressure according to the load, reducing heat generation and energy consumption.
7).Direct connection between the high-pressure gear pump and the motor ensures compact structure, stable operation, and noise levels below 70 dB.
8).The machine ensures accurate results by preventing external forces from interfering with test parameters. Calibration and verification are straightforward and efficient.
9).High-grade hoses and connectors prevent leakage and enhance durability.
10).The testing machine features a high-performance, intelligent digital controller with fully digital PID regulation. It includes a standalone servo amplifier, control software, and data acquisition tools, supporting multiple closed-loop control modes such as constant-rate force, cylinder displacement, and strain.
Smooth transitions between different control modes are possible.
11).The system includes multifunctional test software using VXD technology for high-speed data acquisition across multiple channels. It offers flexible test result analysis according to various test standards, with user-friendly programming for adding new test methods.
Real-time display of test curves and data, with options for zooming, intercepting, and following curves with a cursor. Test data and curves can be stored, and reports can be generated for both individual and batch tests.
12).Includes network connectivity for data sharing and remote operation.
13).Overload protection, preset limit protection, power failure protection, and piston travel limit safeguards ensure safe operation.
| Model | WEW-300 | WEW=600 | WEW-1000 | WEW-2000 |
| Max.load | 300KN | 600KN | 1000KN | 2000KN |
| Load accuracy | Class 1 | |||
| Load range | 1%~100%FS | |||
| Load resolution | 1/500000 | |||
| Piston Stroke | 200mm | 200mm | 250mm | 250mm |
| Max. tensile test space | 600mm | 700mm | 700mm | 800mm |
| Max. Compression test space | 550mm | 650mm | 650mm | 750mm |
| Effective test space | 440mm | 505mm | 525mm | 685mm |
| Clamping method | Hydraulic Automatic Clamp Fixture | |||
| Bending roller width(mm) | 30x120mm | |||
| Bending span (mm) | 30-450mm | |||
| Power supply | 3-phase, 380V, 50HZ 2.0kw (can be customized) | |||
Q: Is your company a manufacturer or a trading company?
A: We are a manufacturer and sell directly to customers.
Q: Can your equipment be customized according to our requirements?
A: Yes, we offer both standard models and customized machines tailored to customer needs, and we can also affix your trademark on the machine.
Q: How do you ensure after-sales service?
A: We commit to one year of warranty and lifetime service. After the warranty expires, if you encounter any problems, we will provide timely assistance. (We only charge for necessary travel expenses and parts costs.)
Q: What languages does your software support?
A: Our software can switch freely between Chinese and English.
Q: Can customers choose not to use the computer provided by your company?
A: Absolutely. However, please provide us with your computer model to verify software compatibility. We will deduct the cost of the computer from the total quote.
Q: What packaging do you use?
A: We use plastic sealing and sturdy wooden boxes for packaging.
Q: What is your delivery time?
A: We usually have products in stock at our factory. If not in stock, the delivery time is typically 15 to 20 days after payment. For urgent needs, we strive to provide expedited services.
){kind=link}